Hello, Guest!  Login or  Register




$9.49 FLAT RATE SHIPPING ON YOUR ENTIRE ORDER!
● Lower 48 States Only ● Excludes LTL Freight Shipments ● Some Restrictions Apply
Support/Contact Us

626-513-4777

$9.49 FLAT RATE SHIPPING ON YOUR ENTIRE ORDER!
● Lower 48 States Only ● Excludes LTL Freight Shipments ● Some Restrictions Apply
Ordering Line Hours:
M-F 7am - 5:30pm PST
Saturdays 8am - 2pm PST
0
$9.49 FLAT RATE SHIPPING ON YOUR ENTIRE ORDER!
● Lower 48 States Only ● Excludes LTL Freight Shipments ● Some Restrictions Apply

Bulldog 1824200100 Electric Powered Jack Kit Aftermarket Single Speed Trailer RV Camper

Part Number: Bulldog 1824200100
Bulldog 1824200100 Electric Powered Jack Kit Aftermarket Single Speed Trailer RV Camper
Bulldog 1824200100 Electric Powered Jack Kit Aftermarket Single Speed Trailer RV Camper (Image may differ from actual product)
$464.85
Bulldog 1824200100 Electric Powered Jack Kit Aftermarket Single Speed Trailer RV Camper
 
Aftermarket Single Speed Jack Applications
  • Designed specifically for use with Bulldog 12,000 LB. jacks
  • 7,500 LB. Lift Capacity
  • Lifts 50% more than competition
  • Lifts 3" per mimute at typical working loads
  • Can be manually cranked in the event of power loss
  • State of the art 12 VDC electric motor
  • Quiet operation - 50% quieter than competitive units
  • Efficient use of electrical power - 60% more efficient than competitive units
  • Permanently lubricated to provide years of maintenance free use.
  • Custom designed wiring harness and rocker switch enclosed in a weather proof box
  • Utilizes a 25 amp circuit breaker with push button reset feature
  • Can be used in both single and tandem jack applications
  • Compact Design
  • Lightweight Aluminum gearbox
Kit Contains:
  • Powered drive assembly
  • Torque stop tube with energy absorption device
  • Dowel pin
  • Terminal box
  • Wiring harness and switch box
  • Hex coupling
  • Weather resistant cover
Special Notes:
  • Kit Does NOT Include: 2 extra bevel gears any longer
  • The two gears were taken out of the kit as they are not needed on 2004 and newer Bulldog single speed jacks.  If the gears are still needed, you must purchase 500212.
Local? Need Installation? We do that too! Please call us at 626.513.4777

NOTE: Designed for use with Bulldog 12,000 lb. jacks only. Not compatible with Pro Series or other jacks.


NOTE: This product may be subject to limited availability. Please contact us at 626-513-4777 between 7:00 AM and 5:30 PM Pacific to verify stock status. Or you can email us HERE.

THANKS FOR LOOKING!

Browse By Category