The Flip-Over Ball gooseneck hitch converts to a smooth bed in seconds. Just rotate the handle and Flip the ball over. In seconds you can have a level bed for all those jobs when an ordinary hitch ball is always in the way. It's easy with a Flip-Over Ball hitch.
The Flip-Over Ball is locked in the one-piece ball socket with a spring loaded stainless steel pin. To invert the ball, just reach into the driver side rear wheel well and rotate the actuating rod 90 degrees. This cams the retaining pin to the open position. Invert the ball, and rotate the actuating rod back to its original locked position. That's all there is to it.
The Flip-Over Ball is not only easy - it's hassle-free. The ball socket is machined from a solid piece of high-grade steel to insure strength and years of service. The retaining pin is machined from stainless steel so it will not rust and seize. The pin is held securely in the locked position by a strong stainless steel spring. When the actuating rod is rotated 90 degrees a cam retracts the retaining pin to its open position so the ball can be inverted. When the actuating rod is returned to its locked position - the retaining pin securely locks the ball in its socket. Extending ball and coupler life.
Flip-Over Ball hitches are rated at 7,500 lbs. maximum tongue weight and 30,000 lbs. maximum trailer weight.
Flip-Over Ball components bolt together with the truck providing an extremely strong and reliable towing system. And you get this comforting strength with only a 3-1/2" hole in the truck bed floor... And, Flip-Over hitches are built specifically for each truck model – so they are a perfect fit.
For safe towing, spring loaded U-bolts (which are level with the bed floor when not in use) are provided for anchoring Safety Chains.
Front and Rear Cross Members are fabricated from 2" X 2.5" X .375" angle. (1" X 2" steel bar is used for the Front Cross Member in Dodge and for the Rear Cross Member in new body style Chevy and GMC Silverado/Sierra.) Cross Members span and sit on top of the truck frame, thereby transferring all trailer tongue weight directly to the frame of the tow vehicle.
The hitch Center Section, containing the Flip-Over Ball hitch ball mechanism, is fabricated in a 24” long channel formed from 0.25" steel plate. The Center Section assembly is trussed to accommodate extreme vertical and lateral loading. Bolting the Center Section in place between the Cross Members creates a vertical load capacity that greatly exceeds the maximum rear axle load rating of the pickup trucks Flip-Over Ball hitches are designed for.
Flip-Over Ball Frame Plates, which secure the hitch to the tow vehicle, bolt to the Front and Rear Cross Members and use existing frame holes in the web of the frame to bolt to the outside of the truck frame.
Flip-Over Ball hitches are designed and built to provide years of trouble-free service the cold-finish steel hitch ball is plated with bright yellow chromate.
If there is not a Flip-Over Ball dealer near you, most trailer and truck accessory businesses can install your Flip-Over ball hitch.
You may choose to install your Flip-Over Ball yourself. The installed hitch spans the truck frame under the bed floor bolting on the outside of the frame rails using existing holes. It is not necessary to loosen the bed box for installation and no welding or fabrication is required. They work fine with bed liners - drop-in or spray-in, and require one 3-1/2" hole in the bed box floor. Everything is provided with the Flip-Over Ball hitch system, including all installation hardware and useful installation instructions. Some hitch models require frame drilling. Installation time is about 2 hours.
THANKS FOR LOOKING!