| Progressive Dynamics PD9280V Inteli-Power Converter Charger 80A with Charge Wizard Camper Trailer RV Inteli-Power 9200 Series Power Converter Charger 80 Amp
The PD9280CV, 80 amp power converter is designed to provide reliable filtered DC power to all recreational vehicle 12-volt lighting and appliance circuits. The PD9280CV converter also provides safe and rapid recharging of RV batteries. Built-in features such as electronic current limiting, reverse battery protection, high voltage protection, low voltage operation, and over temperature shut down ensure long term reliability. The built-in Charge Wizard is a microprocessor-controlled system that constantly monitors the battery voltage and ensures a rapid; yet, safe, recharge. The Charge Wizard can select one of three charging voltages and one of four operating modes depending on the condition and use of the battery. The built-in Accessory Port makes it easy to add the Converter Status Remote Pendant that shows the charger/converter status. Features: Built-in Charge Wizard Reverse Battery Protection Delivers filtered DC power to all 12 Volt lighting and appliance circuits, providing safe and reliable service Electronic Current Limiting Low line Voltage Protection Variable speed intelligent Cooling Fan High Voltage Protection Automatic thermal shutdown Built-in accessory port for the Converter Status Remote Pendant 2 year limited warranty
PD9200 Inteli-Power Panel Specifications | PD9280CV | Maximum DC Output Current | 80 Amps | Maximum Continuous Input Ppower | 1300 Watts | No Load DC Output Voltage | 13.6 VDC | No Load Voltage Tolerance | +/- 0.3 VDC | Full Load Output Voltage | >12.6 VDC | Ripple and Noise Voltage | <50 MV RMS | Input Voltage Tolerance | 105-130 VAC | Input Voltage Frequency | 50-60 Hz | Peak Inrush Current | 80 Amps | Input Current at Rated Power | ~14.9 Amps | Efficiency (Typical) | >80 % | Reverse Battery Protection | Yes | Electronic Current Limiting | Yes | Electronic Fan Control | Auto-speed | Back Up Thermal Protection | Yes | Storage Temperature | -20 to 80 Deg. C | Operating Temperature | 0 to 50 Deg. C | Hipot Voltage Test | 1240V @ Input Terminals | Accessory Port for optional Pendant | Standard | Weight | 7.5 lbs. | Dimensions | 11.5"L X 9.00"W X 3.6"H | UL & c UL Listed | Yes |
THANKS FOR LOOKING! |
