Suburban 5132A IW60 On-Demand Tankless Water Heater
Suburban’s exclusive, technologically superior self-adjusting two-stage modulating combustion system monitors inlet water temperature and flow GPM along with outgoing water temperature and flow GPM, automatically adjusting propane input to virtually eliminate flow reductions and temperature fluctuations. Features state-of-the-art 3-Try Direct Spark Ignition for easy lighting and built-in freeze protection. Can be installed with only a small vent cap on the exterior of the RV; accessory doors are available for other application options. ETL, CE and AGA listed.
12-volt, 2.1 amps
Operates on only 0.5 gallon per minute incoming water flow
Maximum output water temperature 130°F
Built-in freeze protection
Vent Cap and Switch NOT Included and must be purchased separately
No Access Panel necessary for installation if no prior water heater installed
If replacing a previous Suburban or Atwood Water Heater, an Access Panel and Vent Cap (both sold separately) will be required for installation.
Retrofit Access Panel Options:
Suburban 6 Gallon Water Heater will require 6271APW (Polar White)
Suburban 10, 12, 16 Gallon Water Heater will require 6272APW (Polar White)
Atwood 6 Gallon Water Heater will require 521126 (Polar White)
Atwood 10 Gallon Water Heater will require 521132 (Polar White)
All installation methods will require the use of a vent cap which is sold separately.
Wall Thickness will determine appropriate vent cap.
Vent Cap Options:
If Wall thickness is between 0 and 1 inches, will require 260593
If wall thickness is between 1 and 2 inches, will require 260594
If wall thickness is between 2 and 3 inches, will require 260595
Black - 232229
White - 232589
Cream - 232795
THANKS FOR LOOKING!